1.Add professional fog liquid (not included) into the tank2.Plug in and turn on the switch3.Wired remote controlFirst warm-up need 2-3 min, red light is warming up,Green light warm-up is finished. It can spray 18-30s, preheating again only need 50-60s,the same spray for 18-30 seconds.(Produce smoke while keep pressing)4.Wireless remote controlFirst warm-up need 2-3 min,then Control the wireless remote control(A and B the same function),Spray function the same as wired control.(Produce smoke while keep pressing)Routine Maintenance and common faultsPeriodically clean your machine to reduce replacement parts and repair expenses.1.The poor fog liquid can cause blockage. It is recommended to use high quality fog liquid.2.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours' continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps:①Washing the pipe in the tank and the filter head.②Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out.3.If the fog turns less, and the pump makes noise, or cannot spray fog, you should turn off the power immediately and at the same time check the fluid tank, fuse, controller interface and power plug.
Trustpilot
4 days ago
2 weeks ago
