NcStar Beretta 92 Pistol Accessory Rail Adapter (MADBER)

I have done lots of research and this appeared to be the best cost effective solution for my 92 FS brigadier. I received the item in a couple of days and I’m happy to say the product is exactly as described and fit perfectly to the beretta. Now, be careful when you install it.. if you try to place the curved extreme of the rail over the trigger guard the rail adapter won’t fit and if you try to force it, it will scratch the frame under the barrel. You need to leave about 0.5 mm space between the rail accessory and the guard. You will see that once installed it would fit perfectly. The installation took me about 3-4 minutes.

I got screwed over by another brands rail adapter so I took a swing on this as it was only 35 bucks Workd perfect on my 92fs. Fast install. Don't understand how others had issue fitting it unless they couldn't figure out the Allen wrench

Stop! Don't buy it. This Transaction Caused a big Riff Between Amazon And I...Because of it, I had Decided To Stop shopping with Amazon... And no longer be their customer after years of shopping with them. Amazon is no longer siding with their own customers, outside vendors ruined the Amazon experience. I am very mad at the person who wrote the feedback, that fit his Beretta 92 FS, NO It doesn't. The screws are too short and strips the threads, and the worst of while you trying put on you are Sratching your gun. I went on Beretta's web site and they have the real McCoy, more expensive, but it explains to you that you have to have a straight barrel frame, if it has an angle it doesn't fit. And all the Berretta 92's have a slight angle. I thoughts you guys like to know. I had to investigated, and this was what I had found, and I hope it helps. By the way, if you must have a rail, get a gun with the rail.

I was really excited for this as I have a 92FS Italian made Beretta. I got home and installed it immediately. The only downside I found was there was about an eighth inch gap between the rail and the frame of the pistol. I thought I had done something wrong so I took it off and started over three separate times. Gap was still there. I am not a fan of gaps when it comes to furniture on my firearms. Other than that I think it would be a great purchase if you just do some plinking at the range. I am not sure how much I would rely on it staying true in a serious situation.

Shipping time was fine, the packaging was good and it came with instructions, however this accessory will not fit your 92fs right out of the box. First, the two raised 'ears' on the top and front of the device that contact the frame of the pistol will need to be bent outwards in order to properly mate with the frame, they are too tight otherwise. The vertical piece on the underside is actually two brackets that connect through a wedge-shaped piece that is part of the accessory body, the screws that hold them together are small and finely threaded, and these brackets are meant to clamp this thing onto the trigger guard. First, the dimensions are all wrong, and if you try to tighten this thing down without modification, youre likely to strip threads off the screws or just not be able to thread them on at all. This whole thing is made of aluminum, and youll need to take a dremel to either the wedge-shaped vertical piece that the clamps mate with or widen the holes in that piece that the screws go through. If you use this, be prepared to lose some finish off of your gun...I myself may be using jb weld to basically make this thing a permanent modification to the pistol, and would be duracoating everything afterwards. If you want to save money or fool around with a cut-test-cut-test project, then this is the right one for you...otherwise fork over the extra 40 and try out something else. NcStar isnt exactly known for high-quality products.

Perfect fit on my Beretta 92FS trigger guard and I was able to finally add a light !! Highly recommend it for anyone wanting to add a laser or laser light combo on their 92FS

Does exactly what I expected; allows accessories on a gun without a rail. I found no issues with quality or fit (my 92 FS is Italian manufactured). Can't imagine why you would bend the ears where it touches the gun...I found the fit to be very snug which it should be; I don't want my light moving as the pistol recoils. Scratch your pistol?...well, yea if you aren't careful (field stripping a Walther PPK will scratch the pistol at the trigger guard unless you're careful). I guess I can understand a laser not staying properly aligned due to the demands of targeting with a laser, not due to the rail system but mine doesn't seem to move. I did snug the screws up with a back and forth pattern...the rail needs to be evenly installed to fit properly. I found the installation intuitive if you look at it a couple of times, but hey...guys...how about some instructions???! (thank you YouTube). I guess if I expected a factory fit I should have bought a pistol with a rail on it, huh?

Can't beat the price and function for a part that costs less than $30. It also makes the 92fs look more mean. I love the idea of being able to remove this whenever as well. Overall, it feels very sturdy. I did need to adjust it a bit to fit the 92fs but I knew this going forward with my purchase. All in all, great part. I hope they continue making more stuff like this.

It was nice and small so it didn't make the barrel bulky however it didn't quite line up correctly so I had to make some adjustments but overall a very nice addition to my baretta.

Doesn't mount properly, isn't level to the gun, and broke first use! Do not buy this.