DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL 0.33FT

This has been a fantastic little device that lets me know exactly what is wrong with PS5 consoles. Just solder to the test point and plug it into the computer and boom. Fixed many consoles thanks to this device!

This is brilliant - all the voltages! I’ve only used the 3.3v and 1.8v (I bought it for the later). Brilliant. Only minor down side is you really need a usb extension cable with a usb-A female at one end - unless your target is right next to your laptop.

Works perfectly on ps5

I purchased this to flash a Sonoff Zigbee bridge after finding that none of my existing USB to serial adaptors would connect. The DSD TECH adaptor connected the first time and the wide range of output voltages available from the adaptor seriously expands the range of devices I can connect to without breaking out a desktop power supply. The supplied case is a welcome addition and should help to protect the adaptor against accidental shorts or damage vs the standard USB to serial UART adaptors that are generally supplied bare. Another item that is not normally included with these devices is an additional jumper block allowing you to test the adaptor is working by creating a serial loop (any information sent via serial is immediately sent back to the adaptor and can be viewed via a serial port monitor such as the one built into the Arduino IDE), while not vital, this is a thoughtful addition and something that might help new users with testing. Overall, I'm very happy with the product and will update the review in the future if there are any issues with durability.

It appears to be a genuine FTDI Chip as the serial number is not of the known clone / fakes.

Just what I needed. This was used to successfully read the fault codes on a ps5 using UART. Just make sure that it is set to 3.3v, mine was set to this by default. This is done via jumpers. No drivers needed to be installed this was detected by windows 11. Just make sure what COM port its on via device manager. Also this comes with the cables already. Functions perfectly. Great little buy.

Worked perfectly for connecting to an esp32 c6 chip. Been using daily for months now without any issues.

Genuine FTDI part. The adjustable voltage for the logic is very cool and access to all modem control pins is also useful.

Le produit est livré dans petit paquet a bulle. Rien ne manque, les câbles, les jumpers, la notice, et le module sont présent. Le module est protégé dans un joli boitier transparent parfaitement adapté et solide. Il n'a pas été reconnu directement sous Win10 et j'ai du télécharger les drivers sur le site indiqué dans la notice. Je m'en suis servi pour programmer un module ESP8266 et tout a fonctionné du premier coup. Je suis donc satisfait de mon achat.

Perfect

Ottimo prodotto. Funziona come da attese

Genuine FTDI chip, works with any recent kernel, tested on Arch linux, kernel 6.6.3: $ dmesg [102592.385830] usb 2-1.8.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [102592.385840] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [102592.385844] usb 2-1.8.1: Product: FT232R USB UART [102592.385848] usb 2-1.8.1: Manufacturer: FTDI [102592.385850] usb 2-1.8.1: SerialNumber: B001AI5K [102592.426436] usbcore: registered new interface driver ftdi_sio [102592.426453] usbserial: USB Serial support registered for FTDI USB Serial Device [102592.426590] ftdi_sio 2-1.8.1:1.0: FTDI USB Serial Device converter detected [102592.426634] usb 2-1.8.1: Detected FT232R [102592.428027] usb 2-1.8.1: FTDI USB Serial Device converter now attached to ttyUSB0 $ lsusb Bus 002 Device 012: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC

Good