TES Electrosmog RF Microwave Meter Frequency 10MHz to 8.0 GHz EMF Meter Tester TES-593

Description

ELECTRICAL SPECIFICATIONS: Sensor type:Electric field (E) Frequency range:10MHz to 8.0 GHz Directional characteristic:Isotropic, 3-dimensional Measurement range (CW signal>50MHz):20mV/m to 108.0V/m Absolute error(@1V/m and 50MHz):± 1.0dB Frequency response (taking into account typ. CAL factor)± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz) Isotropy deviation:Type. ±1.0dB f>50 MHz Overload limit:4.2W/m2 (40 V/m) Temperature response(0 to 50 ):± 1.5dB Note:Unless otherwise stated, all specifications hold under the following assumptions:Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%. GENERAL SPECIFICATIONS: Measurement method:Digital , triaxial measurement Directional characteristic:Isotropic, triaxial Measurement range selection:One continuous range Display resolution:0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm² Setting time:Typically 1s ( 0 to 90% of meas. value) Display refresh rate:Typically 400mS Display type:LCD 4 digit Audible alarm:Buzzer Measurement units:mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm² Measurement display value:Instantaneous measured value, maximum value or average value since power-on. Measurement average time (in per-set steps):4s to 15 minutes Measurement alarm function:Adjustable threshold with ON/OFF Measurement calibration factor CAL:Adjustable Manual data memory and read storage:99 sets ( only recall by meter ) Battery:1x9V(Not included) Accessory:carrying case & manual