PC Products PC-Marine Epoxy Putty, 2oz Stick, White (25567) (Pack of 1)

Great for sealing caches of silver, gold and cold crypto wallets for debt collectors in the most remote places that has a seal that survives extreme temps. Durable for the freezing ground temps of Mayfield OH and the varying temps of AK/UT/NV/AZ burial of silver/gold/crypto cold wallets. Amazing product for the quick drying and durability in the most stressful environmental temps for storing assets for debt collectors in remote places.

Worked to repair a crack in a pool wall underwater. Decent stuff.

Worked great

This is epoxy rated for wet use, even underwater. Have used both this and 'water weld'. The water weld is a thick paste, so it stays put where you apply it. This is like thick honey, it will slowly ooze downhill. However, in my opinion, this 'sticks' better than water weld. If you have a situation where it will stay in place, or if you can put on more layers to build up where it oozes thin, I prefer this to the Water Weld. It adheres better, and leaves a smoother surface, so you don't have to sand as much if at all to smoothen it.

Used for above ground pool that had a few holes and it works amazing! It is a little hard to mold into place under water but not too difficult just have to play with it for a few minutes to mold it and get it flat. I used patch kits and nothing worked so glad i bought this because i really did not want to empty the whole pool just to patch the holes. Also worked on the pump hose that sprung a hole. It is very hot where I live 120 degrees in the summer and upwards so its nice to have when the heat burns holes. Make sure to mix until both layers are like a whitish grey takes about 2 minutes just using my fingers.

Worked like a charm. Soft and pliable to apply, hardens to concrete strength. I didn't time it, but it was easily cured by the next day. Used UNDERWATER to seal inground pool gap. Was a little tricky to get it from floating off of the concrete surface I was working on, but it did stay after a patient minute. Strongly advise you wear gloves or apply with a tool, because it will take a while to remove the white residue from your bare hands if you opt not to. Regular soap and even garage goop didn't work, (although other compounds might have worked better)

I used this epoxy to fix a stubborn aluminum siding problem. Tried Bondo and other outside products but they never lasted more than a season. The siding is on the hot side of the house and the sun and rain would loosen any fix I tried. It was easy to mold and match the texture of the siding unlike bondo which you have to get right the very first few minutes or forget it. We also have used it to fill in a crease dent on a bumper before painting just to minimize the appearance of the damage. And the original purpose of the stuff was to fix a chip in a white porcelain tub. The only thing that would stay in the chip year after year. The color wasn't a perfect match but a big black chip really looks bad where this stuff was easy to smooth to the tub height and looked better than just painting the chip. Very happy with the product. You can use your fingertip lightly moistened to really get it nice and smooth.

epoxy

Purchased this epoxy putty 2 years go to fix a chip on the fiberglass of my caravan. it's easy to work with and gets the job done fast. The repair also appears to be holding up really well over time. It also amazes me how it hasn't solidified in the tube even after all this time!

So far this has held up nicely. I used it to repair a water butt, the tap had come loose at the the thread end and there was no other way to repair it... One cannot reach it from the inside and a new tap was no good as the barrel part had been stripped. I know that patching from the outside is iffy due to adhesion forces required to keep water in is immense and whether it would stick to both the barrel and tap due to the plastic types was a gamble, but it seems too have paid off. Although I've not had a full barrel of water to test it under true pressure, it hasn't leaked at around 1/4 full. It has yet to go through the test of winter frost etc but has held up the last few months. Being solid is a problem as it can't flex with the expansion of the material it's bonded to, so consider that, but it's holding well in this application so far.

I bought this to try to repair a small chip in my white sink, but this epoxy is a bit on the grey side. As soon as I noticed this greyish colour I removed the epoxy from my sink because I thought it would be more noticeable than the chip. But this is great epoxy otherwise! It's very soft, so it's easy to mix. Very easy! Other brands I've used are much stiffer and contain little solid chunks that are difficult to mix, but this one is the best I've ever used. The 'workable' time is also a bit longer than other brands so you have more time to reshape. If you want this epoxy to dry smooth, just wet your finger and rub the epoxy smooth immediately after you place the mixed epoxy where you need it.

I've had a leak from my shower hose to the wall connection and you name it I've tried it but nothing worked it would still leak and i couldn't have a shower until i brought this, I used half of the tube and followd the instructions and put all around the leaks and left it overnight although you don't have to, in the morning with baited breath i turned on the shower stepping back so not to get wet but absolutely nothing leaked and even on high was brilliant so I'm like over the moon with this product.

This product is fantastic. Long work time, very sticky but not to your hands. Cures quickly. Patched up quite a large hole on a GRP Drascombe hull below the water line and it was a great success.