Want to hardtail your bike, but don't have a bender?... This kit has all you need! -This kit contains the most indestructible 1.125" - .120 wall DOM steel for strength and durability, guaranteed to make you a real man! -3 Pre-bent pieces made specifically for the VT600/VLX 600 (same bike). Requires some welding, grinding, and cutting to the size you want - That's your cue to be all kinds of creative. This hardtail kit works great with the TJBC Solo Seat package and Curved Bobber Fender Kit because I made 'em all and they all rule hard! These pieces sleeve inside the VT600/VLX600 frame, like a used needle in your foot! No slugs are used, as the hardtail pieces act as the slugs. Make sure to rosette or plug weld all junctions. You will want to use a piece of square tubing or one of my mono struts to hold the swing arm in place as a fixture, then cut each side of the swing arm off, leaving about 3 inches of tubing from each axle plate's weld to sleeve the tubing into. Use the same measurement when cutting the top seat rail. Leave about 3 inches of material from the support bracket behind the seat bolt hole. Weld the two pieces of the hardtail in, then cut out the rear section of the mono strut support.
Trustpilot
1 day ago
3 weeks ago
