StarTech.com Standalone 1 to 2 USB Flash Drive Duplicator / Cloner / Eraser, Multiple USB Thumb Drive Copier / Sanitizer, System File / Sector-by-Sector Copy, 1.5 GB/min, 3-Pass Erase, LCD, TAA

The product works like a charm. It was easy to use right out of the box and i bought it since they aren't making older IDE hard drive any more and the trend is to upgrade to SD hard drives. The device works great on making copies of flash drives and it also supports SD cards so it's ausome to have!!! I'm not sure if you have to buy the StarTech.com brand of memory card adapters but I did since they where only $20.00 either way this was the best one for it's value and it works great for doing backups! Either way great price for a great item that works like it should right out of the box!

I am always a little skeptical about innovative computer items, having been bitten a number of times. Example; USB to HDMI convertors, usually as reliable as a 1990's PCs!Anyway, this item is awesome. The easiest way to use this device is to plug your USB into the source slot (slot 1) and the intended copy or copies into slots 2 and/or 3. Press the power-on button and it quickly boots up, finds the original USB in slot 1 and with no further instructions from you, it clones all the data on the original to the USBs in slots 2 and/or 3. What I really like about this is that it erases everything on the USBs in slots 2 and 3 and you don't have to screw around with multiple copies on the same flashdrive. This is a stand alone device and your PC is not involved. Fantastic.

The media could not be loaded. I had to duplicate 100 usb thumb drives over a period of a couple of days, and this worked as I’d hoped. It took about 10 minutes to duplicate 13.5 GB of data. No failed attempts, and it was super easy to use.

Pro: Very easy to use.Pro: Doesn't connect to a computer, no drivers.Con: Really slow copying a 64 GB thumb drive.Con: Price is a bit higher than it should be.

I use this device daily in a large IT environment to clone our imaging flash drives among other tasks and it has been reliable and easy to use. Depending on the target flash drive, we have averaged anywhere between 7-22 minutes to clone two 16GB drives. The duplicating speed is not an issue as this device is run as a background task. The ability to "set it and forget it" and not tie up a computer to software clone a flash drive has been invaluable and was the primary driving force behind this purchase. This item was the perfect combination of utility and price, as the jump up to a 1:5 duplicator is much higher and not necessary for our needs.

A simple machine that works very well. Copied a 4.2GB FAT32 USB 2.0 to another of the same brand and size in about 9 minutes. The buttons were a little difficult to read, so I solved the problem by carefully filling in the recessed area in each button with white out. After it dried, I used my fingernail or a plastic spoon or knife to carefully remove the excess above the recessed symbols. Looks great.

This product is easy to use and a good price. It works well.

Seriously, this is the best bang for your buck as far as cloners go. I've tried adapters in here, both M.2 to USB & SATA to USB and they work! I can clone hard drives on this thing no issue! Even better is cloning a 2.5" drive directly to an M.2 which would normally cost literal thousands of dollars to get a cloner that officially does that!