GOOFIT PV36 Carburetor Replacement for Warrior 350 Koaiak 350 YFM350 BW350 1987-2004 ATV Quad

This is a great carb for the money. Idled great for me with no adjustments other than the idle speed.My one issue is that it doesn’t have a catch for half choke and you have to hold out for full choke too. I believe the more expensive options have a little catch for the choke at full and half.

Great cheap replica, plug and play. But please make sure you take apart the bowl, take the jets out, take the air/fuel jet out, use carb cleaner on everything, make sure all bolts are tight, people say the carb overflows, that’s cause you have to adjust the float bowl by bending the little metal flap the other way a little bit, and that will fix that issue, make sure the gaskets are on properly, I was about to return the carburetor, but I messed with it and it doesn’t leak a single drop anywhere and works great on my 2003 warrior 350, bolts right on, also I recommend using 12mm nuts that hold the carburetor on because it is much easier to screw them on the studs unlike the 14mm that come with the carb.

Ok, so last year, I had to entirely replace the carbuerator on a warrior I bought brand new in 04. Around 2011 (due to a woman and a move), this quad became stationary garage decor. It wasn't started until 2015, and naturally was in pretty rotten shape. The tires had all gone flat and split... the fuel system was full of laquor...you get the picture. I bought a different carb than this one and put it on last year. No matter how much jet adjustment I did, this thing just wouldn't run right. It'd idle for about 3 minutes, load up, and die. Since I didn't have the money to fix the tires at the time, I just got frustrated and quit. Then two weeks ago my dad asked to borrow it for a mountain fishing trip to wyoming... he'd supply the tires, I just had to fix it. I had 10 days to straighten out this beaten up bike I'd ridden like I stole it for 7 years. So I messed with that 50 dollar carb until the 11th hour, no luck. On a whim, I bought this, taking a gamble. I saw it appeared to be identical to the stock carb outside, but the machining inside looked somewhat rough. Nevertheless, I installed it. Thankfully, this carb performs just as well as the stock one. They took that old quad into the mountains and rode 19 miles on very rough terrain with zero problems at all, and no discernable difference in performance. It's well worth the money.

This carb made my 2000 model wolverine run like a new one again. I tried the other cheaper brand first and it was no good. Then I got this Goofit carb and I was very satisfied it starts faster than ever and idles perfect and runs smooth though out the rpm range

I installed this on my 2003 Wolverine with a Warrior intake manifold. The Wolverine fired up right away and the only adjustment needed was the idle. Very impressed with this carb.

Switched to this for my 1999 Wolverine changed out the throttle cable and the manifold works great has a lot more power now would ecommend doing this for anyone with a wolverine

I installed this carb on a 1996 wolverine 350. The only problem i had as the cable holder had to be removed but it was a breeze. The atv started without the choke and the idle was set perfect. I have not had a chance to test ride but it sounds good and has good response. Also everything is included two extra jets and even has the studs and nuts to connect it to the intake. The first photo is the part i had to remove. Second photo is the finished product Third photo is the original carb looks pretty much identical to the after market. The seal was wore and deteriorated, I the old seal off and in the process of making a new seal out of a sponge just in case someone else is in the same situation and dosent want to pay $45 dollars for a new guide.

So far its been good. Had to adjust the air/fuel majorly but other then that it was very easy to install.

you have to get the proper intake for it to fit in your wolverine and throttle cable runs great ordered a zoom zoom ran terrible this thing fired right up and idled

Replaced old carb with this one and it worked perfect right out of the box.

Me funciona a la perfeccion , si que es verdad que el primero me fallo pero lo cambie y sin problemas, me funciona perfectamente bien.

Monté sur un Yamaha 350 Warrior de 2001, c'est impeccable, le quad tourne nickel sans réglages. Cependant un point noir, l'article n'est pas neuf et comporte des traces d'usures. Ça va qu'il fonctionne bien sinon c'était un retour direct.Dommage. Ça aurait pu être 5*

Produit de très bonne qualité et conforme à mes attentesmonté sur mon warrior sans réglage démarage sans aucun problème.