Stud finder, Stud Center Finding Sensor, Multi Scanner Wood, Metal and AC Live Wire Detector with LCD Display, Deep Scanning (Stud finder)
Description
- Stud sensor scanner depth: detects stud up to 0.75 inches (19mm), metal up to 2.36 inches (60mm), deep Scanning up to 1.5 inches (38mm), presence of live wire up to 2 inches (51mm)
- 3 in 1: multi-scanner stud finder for wood, metal, deep, AC current. Quickly locates edges and center of wood, wall studs, metal pipes, wooden joist, rebar behind walls, floors and ceilings, also indicates the presence of live AC wire
- Easy to read: LCD with digital display and continuous sound warning indicating you the location of the edges of the studs
- Easy to use: only three buttons, first press on/off button, then select the probe Type, after that just press and hold the “scan button”(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds
- Compact design is easy to hold and use. Low battery indication. Battery: 1x9V battery（included）suring tools, layout tools, stud finder wallscanner, wallmount
- ›See more product details
MICMI Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the center of wood and metal studs and joists behind walls, floors, and ceilings etc. This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the center of stud.Features:- STUD mode: detect metal and wood studs up to 0.75 inches (19mm) .- METAL mode: detect metal pipes ,rebars etc up to 2.3 inches (60mm) .- DEEP mode: detects wooden beams ,metal rebars up to 1.5 inches (38mm) .- AC mode: detects AC live wire up to 2 inches (51mm) . Select AC scan mode to determine position of hot wires. Begin by placing the scanner at some position away from hot wiring.- Auto power off after about 1 minutes of non-use.- Low battery indicator- Auto calibration all functions detection- Battery :1x9V battery（include）How to use 1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning mode you want to detect. Listen “beep”to confirm the mode button effective.2: Place the device flat on wall first. Then press and hold the button at the left side of the device , and keep the unit still until the unit sound a short beep twice and the display bars will be cleared .3: While still holding on the button ,move the stud finder on the desired surface to scan and detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to right.4 : When the device detected an object , it will beep continually and a peck shape will also display on the LCD screen .Battery installation1.Open battery door on back of case.2.Connect a 9-volt battery to battery clip.3.Insert battery into case and replace battery door.Package Contents1 x Stud Finder1 x 9V battery (included)1 x User Manual
Reviews
D**E
Works great, not the most intuitive use
I used it for the first time, it found 3 studs perfectly. The two buttons aren't the most clear and the instructions aren't great, but for non-professional use for the couple of times a year you need this, it'll do the job.
H**C
Stopped working after 3 times
Product is cheap and useless.. thought entire wall was a stud after 3 times using it. Worthless and outside return window.
R**
It works
It works, it does everything it says it does.
J**N
Truth...
Purchased this to put up picture frames and curtain rods. Absolutely does what it says. For the price it's great. A little hard to get the deep scan to work but it does is you are patient.I would recommend this for the price.
S**3
Works perfect
Works good
B**T
Very easy to use
Fast shipping, easy to use, display is easy to read. Great for anyone to use
H**R
not much better than my 25 year old one.
Just not as good as I had hoped for.
Common Questions
Trustpilot
3 weeks ago
2 days ago
