Colour Name:Skin  |  Size Name:500ml It is widely used in many fields such as industrial parts, garage kits, craftwork design, education, archaeological model, clock and eyeglasses, etc. Please confirm that the UV wavelength of your 3D printer is 405nm. Specification: Size: ~500g/500ml, 1000g/1000ml Color: Black,White,Grey,Yellow,Green,clear, etc Main material: resin monomer , photoinitiator Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s Resin parameters: Solidify wavelength: 405nm Hardness (D): 79.0 Viscosity (25C): 552.0 mpa.s Liquid density: 1.100 g / cm³ Solid density: 1.184 g / cm³ Flexural strength: 23.4 Mpa Tensile strength: 23.4 Mpa Elongation frequency: 14.2 % Precautions: 1. Storage 1) Keep away from light and sealed at room temperature. 2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment. 2.Usage: 1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children. 3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. 4) For accident contact, please wash by plenty of water immediately. Seek medical advice if necessary. 5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness. 6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. Safety Information: 1)Keep out of the reach of children and animals 2)Always wear gloves and eye protections before use to avoid direct contact with skin and keep room ventilated. 3)Do not be used for products intended for internal use or in contact with food or drink items.
R**N
Does not work.
I finally got around to using this and it's just awful. It does not work. I'm so angry at myself for buying two of these. DO NOT BUY THIS. Anycubic green that came with the printer worked great, but this grey stuff just doesn't stick. Look around reddit everyone has had the same issues. DO NOT BUY.
S**8
Very good resin. Delighted.
Excellent resin. Great colour for models, better than the clear green for seeing details and eliminating the need for that first primer 'check coat' worked well with recommended settings.Delighted and will use this again.Models shown with supports removed but no other post processing.
J**N
Short expiry date
Order arrived nicely packaged, but all the grey resin that arrived had an expiry date of 1 month and 11 days from the date the item arrived. Not impressed that Anycubic had sent out resin with such a short shelf life. Resins do go off and on an order of 3 litres you would expect a longer shelf life. The 1 litre aqua blue resin had an expiry of 2 months which, though better than 1 month, is not really useful. I may just be unlucky in this case, but be aware of this when making your purchase.
D**
👌
A very reliable resin. Prints consistently. I've probably used 20 bottles of the stuff by now. A tiny bit brittle but not too bad. Not odorless but not a strong smell
O**K
Out of date
Was sent a out of date bottle
F**C
Use standard parameters.
Use for small print as it is without pigment. Very good result, easy to use, no dcrap print.
H**S
Great quality resin.
Reliable, quality resin. GREAT PRICE.8s exposure time, no problem.
C**N
Happy printing
Craking resin for a cracking printer
Trustpilot
2 weeks ago
3 weeks ago
