--- product_id: 100613175 title: "DIN or Rackmount" brand: "tupavco" price: "€ 773.18" currency: EUR in_stock: null reviews_count: 8 category: "Tupavco" url: https://www.desertcart.be/products/100613175-din-or-rackmount store_origin: BE region: Belgium --- # 5KA surge protection with Gas Discharge Tubes Gigabit PoE+ 1000 Mbps LAN speed 16 Ethernet ports for full rack coverage DIN or Rackmount **Brand:** tupavco **Price:** € 773.18 **Availability:** ❌ Out of Stock ## Summary > ⚡ Protect your network like a pro — surge-proof your rack, stay lightning fast! ## Quick Answers - **What is this?** DIN or Rackmount by tupavco - **How much does it cost?** € 773.18 with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.be](https://www.desertcart.be/products/100613175-din-or-rackmount) ## Best For - tupavco enthusiasts ## Why This Product - Trusted tupavco brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Key Features - • **Robust 5KA Surge Defense:** Gas Discharge Tubes deliver industry-grade 5KA 8/20μs lightning suppression for ultimate peace of mind. - • **High-Power PoE+ Compatible:** Supports PoE+ devices without compromising network speed or stability. - • **Full 16-Port Rack Protection:** Safeguard every connection in your 1U server rack with 16 dedicated surge protectors. - • **Seamless Gigabit Performance:** Zero signal interference ensures your network runs at full 1000 Mbps capacity. - • **Professional Rack-Ready Design:** Includes rack rails and mounting hardware for quick, secure 19" 1U installation. ## Overview The Tupavco 19" Rack Mount Ethernet Surge Protector is a 1U, 16-port device designed to shield your server rack’s Ethernet connections from damaging surges. Featuring 5KA Gas Discharge Tube protection, it supports high-speed Gigabit PoE+ networks without signal loss. Built with aluminum housing and complete mounting hardware, it integrates seamlessly into standard 19" racks, delivering reliable, professional-grade surge defense for critical network infrastructure. ## Description desertcart.com: Tupavco 19" Rack Mount (16 Port) Ethernet Surge Protector PoE+ Gigabit (Server Rackmount 1U) : Health & Household Review: No interference with signal - I installed this surge protector between my cable modem and my router today. Easy peasy. Plug the Ethernet cables into each end (marked "Line" and "Equip") and attach the ground terminal to something grounded. (I used a 12AWG solid wire and a ground screw on my uninterruptible power supply.) Running Ookla Speedtest verified no degradation of signal. Hopefully, I'll never find out if it works. Review: Well made and grounded, but not shielded - This surge protector is clearly well-made (and others have mentioned that it saved their equipment). The metal RJ45 jack frames are connected to each other and to the ground connection, so it is compatible with shielded cable in the sense that it will conduct the shield connection. However, the device itself is not shielded (I took it apart to inspect how it was constructed). The case is plastic, so the device is a potential source of EMI entry. If you're looking for a shielded version that is completely encased in metal connected to ground, see Tupavco's TP302 (https://amzn.to/3IRJsaq) and my review about it. ## Features - 1U Rack Mount 16x Ethernet Surge Protector -Gigabit GbE PoE/High PoE+ 1000 Mbps LAN Ethernet Network - Gas Discharge Tubes for Full Protection GDT - Lightning Suppressor RJ45 Cable Protection CAT6/CAT5 - Line Line-Ground Protection, Bidirectional Clamping, 5KA 8/20μs - 16 (Replaceable) surge protectors with Panel mount Includes: 1x Rack Rail; 16x Surge Protectors - Compatible with 19" Inch Server RackMount Cabinet 1U - Assembly required (16 screws included); Clips included only for DIN mount ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B078PDRW12 | | Best Sellers Rank | #51,479 in Electronics ( See Top 100 in Electronics ) #373 in Surge Protectors | | Brand | Tupavco | | Color | Black | | Compatible Devices | Server | | Customer Reviews | 3.9 out of 5 stars 123 Reviews | | Enclosure Material | Aluminum | | Is Assembly Required | Yes | | Manufacturer | Tupavco | | Material | Aluminum | | Mfr Part Number | TP316 | | Mounting Type | Rack Mount | | Size | 16 Ports Rack | | UPC | 638362929488 | ## Product Details - **Brand:** Tupavco - **Color:** Black - **Compatible Devices:** Server - **Material:** Aluminum - **Size:** 16 Ports Rack ## Images ![DIN or Rackmount - Image 1](https://m.media-amazon.com/images/I/81yRsaXSu4L.jpg) ## Available Options This product comes in different **Size** options. ## Questions & Answers **Q: Will this protect poe++ or just poe+?** A: From the manufacturer's website Nominal PoE Voltage <60 V Maximum continuous current 1.2 A Therefore you should be able to get 60 watts continuous, or Type 3 PoE++ **Q: What is a "gas discharge tube", and what is its function in this device?** A: A gas discharge tube is basically a over voltage protector. It is an open circuit until impinging high voltage enters an ionizes the gas inside which creates a low impedance presumably to ground. Only useful in a lightning incident (nearby or direct hit). If the latter then you are fundamentally screwed. I have photos to probe it. Message: if lightning is near (or predicted) then simply disconnect everything. Let us ALL float. I’m talking antennas, AC power cord and ground wires **Q: Does this device support 24v passive poe?** A: YES , this will easily support 24volt passive or non-passive POE. Normally POE is 48volts on power injectors or network switches. I know that it will support over 60 volts, as to smart 3 lens outdoor cameras that i have installed at Banks. This is , if you ground the DIN rail correctly to allow gas discharge tube to function properly to protect equipment. Gas discharge tube opens and closes data circuit, with no ground it will just act as a fuse and burn up after lightning strike. I always use TWO ethernet surge protectors , one on network switch rack and one upon entry into building with both TWO DIN rails grounded. Daniels Data Inc. - Dallas,TX - John Daniels **Q: How long of a rail do you need? What is the shortest length that I can use?** A: It mounts perpendicular to the dinrail so about 1” is minimum. I’d use enough too have two acres in the rail though or it will rotate. ## Customer Reviews ### ⭐⭐⭐⭐⭐ No interference with signal *by D***N on May 30, 2022* I installed this surge protector between my cable modem and my router today. Easy peasy. Plug the Ethernet cables into each end (marked "Line" and "Equip") and attach the ground terminal to something grounded. (I used a 12AWG solid wire and a ground screw on my uninterruptible power supply.) Running Ookla Speedtest verified no degradation of signal. Hopefully, I'll never find out if it works. ### ⭐⭐⭐⭐ Well made and grounded, but not shielded *by N***S on January 16, 2023* This surge protector is clearly well-made (and others have mentioned that it saved their equipment). The metal RJ45 jack frames are connected to each other and to the ground connection, so it is compatible with shielded cable in the sense that it will conduct the shield connection. However, the device itself is not shielded (I took it apart to inspect how it was constructed). The case is plastic, so the device is a potential source of EMI entry. If you're looking for a shielded version that is completely encased in metal connected to ground, see Tupavco's TP302 (https://amzn.to/3IRJsaq) and my review about it. ### ⭐⭐⭐⭐⭐ Very high quality surge protector. *by B***S on September 6, 2019* I was blowing one port on my router nearly every electrical storm. Frontier i think was getting tired of replacing them as i lost four routers in five months. I live on the highest natural point in central florida which is reported to have more lighting strikes than any place in the USA. Since i installed this i haven't lost a Ethernet port and have gone through one hurricane and seventeen major electrical storms. When I installed it i used one of the ideas of another reviewer thank you by the way. I did not use the ground wire supplied by the vendor but ran a 12 AWG multi strand wire from the unit to a three prong 15 amp replacement; plug's grounding pin. All other pins or spades on the plug remained empty and covered internally with heat shrink. Plugged into a outlet within three feet of the surge protector. Fantastic solution will now add these to all my ports entering the router and at my ORBI Wifi units. ## Frequently Bought Together - Ethernet Surge Protector 19" RackMount (16 Port) PoE+ Gigabit (Server Rack Mount 1U) -Gas Discharge Tube -RJ45 Lightning Suppressor -LAN Network CAT5/CAT6 Thunder Arrestor GbE 1000 Mbps -Tupavco TP316 - Ethernet Surge Protector (2 Pack) Gigabit PoE++ (154W/3.2A) Mounting Flange (Gas Discharge Tube) Metal Shielded RJ45 Lightning Suppressor LAN Network CAT5/CAT6 Thunder Arrestor 1000 Mbps Tupavco TP302 - Ethernet Surge Protector (10 Pack) Gigabit PoE++ 154W/3.2A -Mounting Flange (Gas Discharge Tube) Metal Shielded RJ45 Lightning Suppressor LAN Network CAT5/CAT6 Thunder Arrestor 1000 Mbps Tupavco TP302 --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.be/products/100613175-din-or-rackmount](https://www.desertcart.be/products/100613175-din-or-rackmount) --- *Product available on Desertcart Belgium* *Store origin: BE* *Last updated: 2026-05-03*